The Energy and Water Ombudsman Queensland (EWOQ) is a free, fair and independent dispute resolution service for unresolved complaints with your electricity, gas or water supplier. Before you contact EWOQ with your complaint, you must first try to resolve the problem with your electricty, gas or water company.
Free call 1800 662 837 Complaints  |   Resources  |   Scheme Participants  |   Embedded Networks

Understanding your meter

Further information:

Meter identifiers

Each gas meter has a unique serial number located on its front. You should quote your meter number when you contact your retailer, especially if you are moving, transferring, or if your address is difficult to locate.

As your meter number changes when a meter is replaced, there is a second identifier called a Meter Installation Reference Number (MIRN). This is used by your electricity company to distinguish which meter is yours. You can find your MIRN on your electricity bill.

The MIRN is attached to your address and not your meter.


Where is your meter

Your gas meter should be located on the front or back of your property, or on some older properties it could even be inside the house. If you live in an apartment, unit or townhouse complex, it is likely that all of the meters are located in one central location.

In some older unit blocks there might only be one meter for the property and the body corporate or landlord will determine how the usage is charged to residents.


Access to your meter

You must provide safe and clear access to your meter for maintenance, meter readings and connecting or disconnecting supply. If you live within a secure complex, your distributor will have access arrangements with the complex manager.

Your gas bill will contain advice about the approximate date of the next scheduled meter reading so you can provide clear and safe access for the meter readers. If you cannot provide access to your meter (due to a locked gate, unsecured dog or other obstruction) your retailer has the right to estimate your bill.

If access to your gas meter continues to be denied, your retailer has the right to disconnect your supply. To avoid this, contact your retailer to find out what other arrangements can be made. Options include self-reads, moving the meter to the fence line, or organising a special meter reading.

Your meter will be read by your distributor (the companies that own the poles, wires and meters), or their representative, and the information will be given to your retailer for billing.

Generally your meter will be read every three months. Distributors do have the right to estimate your usage instead of taking an actual meter reading, but they must read your meter at least once every 12 months.


Are you being billed for your meter

You should always check that the meter number on your bill matches the meter number on your property. There is always a chance that information can become mixed up and you may be billed for an incorrect meter. If the numbers do not match, or any are missing, you should contact your retailer and provide the correct meter number.

In instances where your meter sits with a number of other meters, you may want to check which meter is yours. Turn off the main switch to your property for a few minutes and see if the meter you believe to be yours stops recording usage. If the meter does not stop, it could mean:

  • It is not your meter. Check to see if one of the other meters has stopped - that may be your meter.
  • There may be something else connected to your meter that you are not aware of (a shed, or something from a neighbouring property or common areas).
  • The meter may be faulty. You can contact your retailer and arrange a meter test. Be aware that the test is at your cost unless the meter is found to be faulty. It is rare for meters to be faulty, so a meter test should be the last resort.


How to read your meter

  • Dial meters: stand directly in front of the meter so you can see the exact position of the pointer on each of the five dials. Record the numbers from each dial (from left to right). If a pointer is sitting between two numbers on a dial, record the lowest number.
  • Odometer meters: record the numbers from left to right (but ignore the red numbers on gas meters).
  • Digital meters: these show the total usage for the billing period.


Calculating your usage

You can measure your gas usage by calculating the difference between your ‘start read’ and the ‘end read’. For example, if you move into a property and the meter shows 18525 (the start read) and at the end of the billing period it shows 24976 (the end read), your electricity usage would be 6451 kilowatt hours (24976 – 18525 = 6451).